Intuitive controls
The choke and purge are easy to reach and understand.
X-Torq® engine
The X-Torq® engine design increases torque over a wider rpm range providing maximum cutting power.
Detachable shaft
Detachable shaft for easy transport and storage.
Smart Start®
The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%.
Fuel pump
Fuel pump designed for easy starting.
Auto return stop switch
Stop switch automatically resets to the ON position for trouble-free starting.
Tap 'n Go
Heavy duty twin line cutting system with Tap 'n Go for quick line feed.
Efficient air filter
The efficient air filter provide less cost for service and less engine wear
Engine
Cylinder displacement 25.4 см³
Power output 1 kW
Maximum power speed 8500 rpm
Fuel tank volume 0.51 l
Fuel consumption 600 g/kWh
Idling speed 3000 rpm
Spark plug NGK BPMR8Y
Electrode gap 0.65 mm
Torque, max. at rpm 6000 rpm
Torque, max. 1.2 Nm
Clutch engagement speed (±120) 4000 rpm
Maximum rpm output shaft 6500 rpm
Exhaust emissions (CO2 EU V) 1141 g/kWh[1]
Transmission
Gear ratio 1.46
Drive gear angle 30 °
Capacity
Cutting width 46.6 cm
Dimensions
Weight (excl. cutting equipment) 4.5 kg
Tube length 1483 mm
Tube diameter 24 mm
Lubricant
Lubricant type Husqvarna 2 stroke or equiv. at 50:1
Emission
Exhaust emissions (CO average) 87.57 g/kWh
Sound and Noise
Sound pressure level at operators ear 94 dB(A)
Sound power level, guaranteed (LWA) 106 dB(A)
